SPECIFICATIONS

Vehicle Systems Specifications

Lift Relay Group - Standard Lift

Do not put a lift truck into service if the chain wear

indication is 2% or more. A reading of 2% or more

could cause damage or injury to persons.

(1) Put LOCTITE NO. 242 Thread Lock on the threads

of the relay group locknuts after adjustment of the

lift chains is completed.

(2) Maximum chain wea........................Less than 2%

(See Chain Wear Test in TESTING AND

ADJUSTING).

(3) Distance from bottom of inner mast to bottom of

lower bearing on carriage must be even (flush)

with the inner mast.

WARNING

IDCS174S