SPECIFICATIONS

Vehicle Systems Testing And Adjusting
Parking Brake Control Group
Adjustment
Parking Brake Control Group
(1) Brake lever. (2) Cable assembly.
Parking Brake Off
(2) Cable assembly. (3) Jamb nut. (4) Brake strap assembly.
(5) Spring. (Y) 70 L 0.5 mm (2.76 L 0.2 in).
1. Put the brake lever (1) in the fully raised OFF
position. Seat the shoulder of cable assembly (2)
against brake strap assembly (4) at ÒXÓ. Adjust
overtravel spring (5) length (Y) to 70.0 L 0.5 mm
(2.76 L 0.2 in). Tighten jamb nut (3).
Parking Brake On
(6) Bolt. (7) Nut. (8) Retaining nut. (9) Jamb nut.
(Z) 6 mm(.24 in) maximum.
2. Apply parking brake. Adjust stop bolts (6) to
dimension (Z) of 6 mm (.24 in) maximum. Tighten
jamb nut (7).
3. Release parking brake. Adjust cable assembly
retaining nut (8) so that parking brake pedal (1)
returns to full off position and brake strap assem-
bly contacts stop bolt. Tighten jamb nut (9).
54
1
2
4 2
X5
3
Y
6
Z
Z
7 7 6
98
IDCS143S
IDCS144S
IDCS145S