Specifications

Power Train Specifications 5
Specification
Torque Converter
(1) Torque for six bolts that hold torque converter drive
plate to the flywheel ........... 45 ± 7 N·m (33 ±5 lb·ft)
Forward and Reverse Control
Group
(1) Torque for screws (four) that hold clamp to hand
control switch………..3.4 to 3.9 N·m (30 to 35 lb·in)
(2) Torque for bolts (two) that hold clamp to steering
column……………….2.8 to 3.4 N·m (25 to 30 lb·in)
Apply a bead of LOCTITE NO.242 Sealant to inner
radius of the clamp, prior to assembly.
Transmission Solenoid
Valve block elements located on top of transmission
housing…………………………………9.7 to 10.3 ohms
For additional solenoid and valve group
specifications see section “Valve block elements”