Specifications

Power Train Testing and Adjusting 61
Adjustment of Crown Wheel
1. Torque crown wheel bolts to 80 N·m (59 lb·ft).
2. Install differential assy., to previously mounted
position (rotate both nuts simultaneously to
maintain bearing preload).
3. Tap on both sides of the differential to achieve
correct position of bearing cups.
4. Check backlash between pinion and crown gear in 3
different positions. Backlash shall be 0.15-0.20 mm
(0.006-0.008 in)
5. Check contact face by rotating pinion in both
directions, hold back crown wheel.