Specifications

Power Train Testing and Adjusting 58
Adjustments on Drive axle
Axle, Pinion, crown gear
1. Measure the depth from center of diff. carrier to the
seat of pinion bearing cup. (Dimension A)
2. Measure the width of pinion bearing.(Dimension B)
3. Check the etched value on the pinion face.
(Dimension c)
*unit : mm
4. Calaulate the shimpack thickness according to the
following formula.
Shimpack thickness = A-(127+B+C)
Example) if A=160.50, B=32.00, C=+0.05
Then, shimpack thickness
=160.50-(127+32.00+0.05) = 1.45mm
* To minimize the measuring error, measure
three places at least and average them.
5. Shims of calculated thickness laid into bearing seat.
6. Install bearing cup.
7. Install crown gear, differential assy and cap lightly.