Specifications

Power Train Specifications 11

Final Drives and Wheels

GC Model Trucks

Oil Cooled Disc Brake Type

(1) Apply LOCTITE NO.242 Thread Lock to threads of

spindle bolts.

Torque for bolts that hold spindle to drive axle

housing……………..115 ± 14 N·m (85 ± 10 lb·ft)

(2) Torque for wheel mounting bolts ....270 ± 25 N·m

........................................................(200 ± 20 lb·ft)

(3) Wheel bearing adjustment :

(a) Tighten wheel bearing nut to 135 N·m (100lb·ft)

while the wheel is turned in both directions.

(b) Loosen the nut completely. Tighten the nut

again to 50 ± 5 N·m (37 ± 4 lb·ft).

the wheel bearing nut.

(4) Torque for bolts that hold cover to axle housing

…………………………...55 ± 10 N·m (40 ± 7 lb·ft)

(5) Apply Loctite No.515 Sealant to the axle flange and

cover on the contact area.

D, G Model Trucks

Dual Drive wheels

Oil Cooled Disc Brake Type

(1) Apply LOCTITE NO.242 Thread Lock to threads of

spindle bolts.

Torque for bolts that hold spindle to drive axle

housing ....................115 ± 14 N·m (85 ± 10 lb·ft)

(2) Use a crisscross procedure to tighten nuts.

(a) Torque for single drive wheel mounting.

nuts....................644 ± 34 N·m (470 ± 25 lb·ft)

(b) Torque for inner and outer dual drive wheel

mounting nuts....644 ± 34 N·m (470 ± 25 lb·ft)

(3) Torque for bolts that hold adapter assembly to hub

................................ 285 ± 13 N·m (210 ± 10 lb·ft)

(4) Wheel bearing adjustment :

(a) Tighten wheel bearing nut to 135 N·m(100 lb·ft)

while the wheel is turned in both directions

(b) Loosen the nut completely. Tighten the nut

again to 50 ± 5 N·m (37 ± 4 lb·ft).

the wheel bearing nut.

(5) Torque for bolts that hold cover to axle housing .....

.....................................55 ± 10 N·m (40 ± 7 lb·ft).

(6) Apply Loctite No.515 Sealant to the axle flange or

spacer and cover on the contact area.

1 2