Specifications

Vehicle System Disassembly & Assembly 7

4. Separate O-ring seals (7) from valve body.

Be careful not to miss the small spring and ball.

5. Take apart the relief valve into plug (8), spring (9)

and poppet (10).

6. If necessary, separate the lift lock valve (11) from

the lift block.

Assembly of Control valve

1. Make sure that all valve parts are clean and free

from dirt and dust.

2. Assemble the spool (1), return cap (2) and valve

section, then fasten the screw (3). Replace seals

with the new one in case of leakage from cap side

or spool side caused by dent or scar on spool

3. Install O-ring seals (4) on the valve body. Make sure

that the small ball and spring are installed.

Spring

Ball

7 7

IDCD221P

4 4

IE0M117S