Specifications

Vehicle System Disassembly & Assembly 85

4. Remove the washers and bolts (4) and exhaust pipe

(5) for the diesel truck.

5. Support counter weight (6) with a hoist and tooling

(A) as shown.

The weight of the counter weight is approximately

2,100kg (4,630 lb).

6. Remove the washer plate and bolts (8).

7. Use the hoist and tooling (A) to remove counter

weight (6). The weight of the counterweight is

approximately 2,100 kg (4,630 lb).

NOTE : The following steps are for installation of the

counterweight.

8. Put counterweight (6) in position on the frame, and

install bolt (8) and bolts (9). Tighten the bolts to a

torque of 400 ± 60 N·m (300 ± 45 lb·ft).

NOTE : This completes the installation of the counter

weight for gasoline model machines. For L.P. Gas

model machines, reverse the procedures and Steps 1

through 3 and 5 to complete installation of the L.P.

tank mounting bracket and gas line. For diesel model

machines, reverse the procedures and steps 4 through

5 to complete installation of exhaust pipe and cover