Specifications

Vehicle System Disassembly & Assembly 82
Disassemble Steering Cylinder
Start By :
a. Remove steering cylinder.
1. Put location marks on end caps (1) as to their
position on the steering cylinder tube.
2. Remove end caps (1) from the steering cylinder.
3. Remove cylinder tube (2) from the rod assembly.
4. Remove piston seal (3) and wear ring (4).
5. Disassemble each rod cover as follows.
a. Remove retaining ring (5) and dust wiper (6).
b. Remove U-packing (7).
c. Remove O-ring (8) and back up ring (9).
d. Remove DU-bush (10).