Specifications

Vehicle System Disassembly & Assembly 80

Steer Axle

Remove & Install Steer Axle

Tools Needed A

Jack Stand 4

WARNING

Be sure the pressure in the hydraulic system is

released before any lines or hoses have been

disconnected.

1. Put the lift truck in position with a jacket.

2. Disconnect tube (1). Plug and cap all openings to

prevent contamination and debris from entering the

system.

3. Support the steel axle with a floor jack.

4. Loosen mounting bolts (2) until approximately two

bolt threads are left in the mounting bosses.

5. Lower the steer axle onto the bolt heads with the

floor jack.

6. Remove bolts (2) and mounting caps (3) from the

steer axle.

7. Remove steer axle (4). The steer axle weighs

approximately 200 kg (440 lb).

NOTE : Use the following steps to install the steer axle.

8. Use a floor jack to position steer axle (4).