Specifications

Vehicle System Disassembly & Assembly 79
4. Remove four bolts (5) and cover (6).
5. Remove the nut (7) and bolt (8). For purposes of
reassembly, the torque for bolt (7) is 11 ± 1 N·m(100
± 9 lb·ft).
6. Remove kingpin (9) and knuckle (10).
7. Remove spacer (11), bearing cup (13) and bearing
cone (12).
8. Check the condition of lip type seal (14). Replace
seal (14) with new if worn or damaged.
9. Repeat steps 7 and 8 for the remaining seal,
bearing and spacer in the other side of knuckle
(10).
NOTICE
Check the condition of all seals, bearings and
components. If any parts are worn or damaged use
new parts for replacement.
10. Lubricate the pins, king pins and bearings.
11. Install the steering knuckle, kingpins and bearings
in the reverse order of removal.
End By:
a. Install steer wheels.
IDCD081P
11
12
13
10
14