Specifications

Vehicle System Disassembly & Assembly 78

Tie Rod

Remove and Install Tie Rod

Tools Needed A

Floor Jack 1

Driver Set 2

Start By :

a. Remove steer wheels.

NOTE : The procedure to remove and install the tie

rod is the same for each steer wheel.

1. Support the steer axle with a floor jack (A). Position

the wheel to gain access to the tie rods.

2. Remove two pin retaining bolts (2). Remove pins (1).

3. Remove tie rod (4) and dust seals (3).

4. Use tooling (B) to remove bearings (5) from the tie

rod.

5. Use tooling (B) to install new bearings (5) in the tie

rod.

6. Install the tie rod in the reverse order of removal.

Steering Knuckle, Kingpin,

and Bearing

Remove and Install Steering

Knuckle, King Pins and Bearing

Tools Needed A

Drive Set 1

Start By:

a. remove steer wheels

NOTE : The procedure to remove and install the

steering knuckles, kingpins, and bearings is the same

for both sides of the lift truck.

1. Remove pin retaining bolt (2). Remove pin (1).

2. Position the tie rod away from the steering knuckle.

3. Remove four bolts (3) and cover (4).

IDCD082P