Specifications

Vehicle System Disassembly & Assembly 77

a. Use tool (4) to tighten nut (3) to a torque of 135

N•m (100 Ib•ft) while slowly rotating steer wheel.

b. Use tool (4) to loosen nut (3) completely.

c. Use tool (4) to tighten nut (3) again to a

torque of 50±5 N•m (37±4 Ib•ft).

10. Put the bearing lock washer (2). Check out if two

mounting bolt holes are aligned with the holes at

bearing lock nut. If it doesn’t match, rotate the

bearing lock nut clockwise about, /32 turn.

11. Assemble (2) bolts after Loctite 242 is applied.

12. Pack the multipurpose grease inside the cap.

13. Fit the cap.

14. Remove a jack and lower the lift truck.