Specifications

Vehicle System Disassembly & Assembly 76

5. Remove bearing lock nut (3) with the jig (4) like the

picture.

< Unit : mm >

6. Remove bearing cone and cup from steer hub.

NOTE : Check the condition of all seals, bearings and

components. If any parts are worn or damaged use

new parts for replacement use tooling (C) to install

bearing cups.

7. Pack bearing cones, and Iubricate the contact

surfaces of the bearing cups with Multipurpose

Grease.

8. After putting the bearings, put the bearing lock nut

(3).

9. By using the tool (4), adjust the bearing as follows.