Specifications

Vehicle System Disassembly & Assembly 61
Steering Unit
Remove & Install Steering Unit
Start By:
a. Remove covers from steering wheel group
.
WARNING
To prevent personal injury be sure pressure in the
hydraulic system has been released before
disconnecting any hydraulic lines. Slowly loosen
the cap of the hydraulic tank to release any
pressure in the tank. Be cautious of hot hydraulic
oil when any lines are disconnected in the
hydraulic system.
NOTE : Identify and mark all hydraulic hoses for
purposes of reassembly.
1. Disconnect (4) tubes and (1) hose assembled to
steering unit.
2. Remove four bolts (1).
NOTICE
Steering unit (2) and column (3) can separate after
bolts (1) have all been removed, causing unit (2) to fall.
To avoid damaging components, support the steering
pump while removing bolts (1).
3. Support steering unit (2) while removing the
remaining two bolts (1). Remove steering unit (2).
4. Install the steering unit in the reverse order of
removal.
End By :
a. Install the cover on steering wheel group.
1
3
2