Specifications

Vehicle System Disassembly & Assembly 53
16. Install seal (11) in the spacer.
17. Install spacer (6).
18. Install shims (8) and rod eye (2). Tighten the bolt
on rod eye (2) to a torque of 95±15 N·m (70±11
lb·ft).
19. Install seals (10) and O-ring seal (9) on the piston
20. Install head assembly (5) on the cylinder rod.
21. Install piston assembly (4) onto the cylinder rod.
22. Install nut (3). Tighten nut (3) to a torque of
270±30 N·m (200±22 lb·ft).
23. Install the rod assembly in the cylinder body.
IDCD427P
IDCD422P IDCD423P
IDCD424P IDCD258P
11
2
6
8
10
9
3
4
5