Specifications

Vehicle System Disassembly & Assembly 51

Disassemble & Assemble Tilt

Cylinders

Tools Needed A

Spanner Wrench 1

Start By:

a. Remove tilt cylinder.

1. Use tool (A) to remove head (1) from the cylinder

body.

NOTICE

Use extra care not to damage the highly finished

surface of the cylinder rod and the bore of the cylinder

body during disassembly and assembly of the tilt

cylinder.

2. Remove rod assembly (2) from the cylinder body.

3. Remove nut (3) from the cylinder rod.

4. Remove piston and seal assembly (4) from the

cylinder rod.

5. Remove head assembly (5).

6. Remove spacer (6) from the cylinder rod.

7. Loosen the nut and bolt on the rod eye Remove

cylinder rod (7) and shims (8).

8. Remove seal assembly (10) and O-ring seal (9)

from the piston.

IDCD424P

IDCD422P

IDCD421P

IDCD423P