Specifications

Vehicle System Disassembly & Assembly 47

Primary Lift Cylinder

Remove & Install Primary Lift

Cylinder

Start By:

a. Remove carriage.

WARNING

To prevent personal injury, move the control

levers backward and forward to release any

pressure in hydraulic system. Slowly loosen the

cap of the hydraulic tank to release any pressure

in the tank. Be cautious of hot hydraulic oil when

any lines are disconnected in the hydraulic system.

1. Fasten nylon straps and hoist to the primary lift

cylinder.

2. Remove bolts (1).

3. Pull the cylinder out far enough to disconnect elbow

(2). Remove primary lift cylinder. Weight is roughly

27 kg (60 lb).

NOTE : The following steps are for the installation of

the primary lift cylinder.

4. Put primary lift cylinder (3) in position on the mast.

5. Connect elbow (2).

6. Install bolt bolts (1).

End By:

a. Install carriage.

IDCD059P