Specifications

Vehicle System Disassembly & Assembly 43
Assemble Standard Lift Cylinder
1. Install seal (2) in the bearing.
2. Install wiper seal (1). Install the seal with the lip
toward the outside.
NOTE : Install back-up ring (4) with the curved side
contacting the O-ring seal.
3. Install O-ring seal (3) and back up ring (4) into the
bearing.
4. Install split rings (5) on the cylinder rod.
5. Install cylinder rod (6) in the cylinder body.
6. Install bearing (7) on the cylinder rod and tighten
using wrench (C).
7. Tighten setscrew (8) with wrench (B) to a torque of
6±1 N·m (53±9 lb·in).
End By:
a. Install standard lift cylinders.
IDCD410P
IDCD411P
1
2
3
4
6
IDCD406P
8
B
7
C
IDCD407P
IDCD409P