Specifications

Vehicle System Disassembly & Assembly 32
23. Install hydraulic steel tube to each secondary
cylinder. When install the steel tube, assembling
angle should be kept as shown in above figure.
24. Connect chains (16) at the bottom of the mast.
25. Connect chains (16) at the chain bracket of
stationary mast upper.
26. Install sheave (18) of lift hose.
27. Install the lift hose support bracket (19) and hoses.
28. Install primary lift cylinder.
29. Install carriage assembly from the bottom of inner
mast
IDCD024P
16
IDCD023P
16
18
IDCS322S
13° 15°
IDCD044P
19
IDCD045P
IDCD010P