Specifications

Vehicle System Disassembly & Assembly 31
E. Upper Bearing Adjustment of intermediate Mast
Follow same procedure with above B.
F. Upper Pad Adjustment of Intermediate Mast
Follow same procedure with above C.
17. If the bearings were removed from the mast
mounting blocks, install new ones.
18. Put a small amount of clean grease on mounting
pins (11). Install mounting pins (11) into mast
mounting blocks.
19. If the bearings were removed from the tilt cylinder
pin bores, install new ones.
20. Fasten a hoist and nylon strap to secondary
cylinder (12). Install secondary cylinders (12) into
the stationary mast.
21. Install secondary cylinder mounting brackets (13)
over the secondary cylinders.
22. Install top retainer bolts (14) for the secondary
cylinders.
IDCD041P
IDCD042P
11
IDCD043P
IDCD026P
13
IDCD025P
14