Specifications

Vehicle System Disassembly & Assembly 24
7. Fasten a nylon strap and hoist to secondary cylinder
(9) as shown. Remove secondary cylinders (9).
Each cylinder weighs 50 kg (110 lb).
NOTE: LH, RH secondary cylinders are different.
Identity or mark each cylinder for purpose of
reassembly.
8. Check the condition of bearings (10) located in each
of the tilt cylinder pin bores. Replace
bearings (10) with new if worn or damaged.
9. Remove mast mounting pins (11) from the mast
mounting bores.
10. Check the condition of the bearings (12) located in
each of the mast mounting bores.
Replace the bearings (12) with new if worn or
damaged.
11. Fasten nylon straps and hoist to inner channel (13).
Remove inner channel (13). The weight of the
inner channel is 150kg (330 lb).
12. Remove rollers (14) and the shims from the inner
channel mast.
IDCD027P
10
11
IDCD029P
IDCD028P
14
IDCD030P
IDCD032P