Specifications

Vehicle System Disassembly & Assembly 22
10. Check the condition of the bearings (12) located in
each of the mast mounting bores.
Replace the bearings (12) with new if worn or
damaged.
11. Fasten nylon straps and hoist to inner channel (13).
Remove inner channel (13). The weight of the
inner channel is 150kg (330 lb).
12. Remove rollers (14) and the shims from the inner
channel mast.
13. Fasten nylon straps and a hoist to the intermediate
mast channel (15). Remove mast channel (15).
The intermediate mast channel weighs
approximately 168kg (370 lb).
14. Remove rollers (16) and the shims from the
intermediate mast channel.
15. Remove nylon pads (17) and the shims.
16. Remove rollers (18) and the shims from the
stationary mast channel.
17. Remove nylon pads (19) and the shims.
IDCD031P
IDCD032P
14
13
IDCD034P
IDCD035P
IDCD033P
15
16
17
18
19
IDCD030P
12