Specifications

Vehicle System Disassembly & Assembly 21

4. Disconnect and remove chains (5) from the bottom

of the mast.

5. Remove top cylinder retainer bolt (6) from each side

of the mast.

6. Remove cylinder retainer brackets (8) from each

cylinder.

7. Fasten a nylon strap and hoist to secondary

cylinder (9) as shown. Remove secondary cylinders

(9). Each cylinder weighs 50 kg (110 lb).

8. Check the condition of bearings (10) located in each

of the tilt cylinder pin bores. Replace

bearings (10) with new if worn or damaged.

9. Remove mast mounting pins (11) from the mast

mounting bores.

IDCD024P

IDCD026P

IDCD025P

IDCD028P

IDCD029P