Specifications

Vehicle System Disassembly & Assembly 14
12. Install chain guard/hose support assembly (6) and
four bolts (5) to a torque of 28 ± 7 N·m (20 ± 5
lb·ft).
13. Connect two hydraulic line (4) in their original
positions.
End By:
a. Install backrest.
b. Install forks.
Remove & Install Carriage for Quad
Mast
Start By:
a. Remove forks.
b. Remove backrest.
1. Raise carriage and remove stopper bolts (13).
2. Raise carriage (1). Position a wooden block as
shown. Lower carriage (1) onto the wooden block.
3. Disconnect two hydraulic lines (4) from side shifter
cylinder (2). Plug and cap all openings to prevent
contamination and debris from entering system.
4
13
4
IDCD004P
1
2
6