Specifications

Vehicle System Disassembly & Assembly 8
4. Dust and dirt should be cleaned when you
assemble and disassemble the lift lock valve
5. Install and tighten the tie rods (7). Be sure that you
have to tighten the tie rods to the proper torque.
6. Install solenoid valve on the lift section. Before
assembly, inspece the O-rings (8) and replace
damaged or worn O-rings with new ones.
7. Assemble the poppet (1), spring (2), relief plug (3)
into relief valve. Inspect the poppet and replace it
with new one if it has scar or dent.
NOTE : Until the repaired valve is mounted on the lift
truck, be sure to plug all openings.