Specifications

Vehicle System Testing & Adjusting 80
6. If the indication is not correct, then there is
steering hydraulic failure in the components.
(4) Pressure-Checking Adapter. (5) Pressure-Tube.
(6) Pressure Gauge.
7. If the steering gear and the priority valve are
working properly, the steering cylinder is
defective and must be repaired.
8. Correct the problem and check steering relief
valve pressure again.
a. With the engine running, turn the steer wheels in
any directions and read the indication on
pressure gauge (6).
b. If the indication is approximately the pressure
shown in Step 5, then the steering gear has a
hydraulic failure.
c. If the indication is too low or too high, then the
priority valve or its components must be replaced.
IDCS134S
M10 X 1.0 THD
(6)
(5)
(4)