Specifications

Vehicle System Specification 5
Specification
Hydraulic Control Valve
CONTROL VALVE
Main Relief
Pressure
Tilt, Auxiliary
Relief Pressure
D20S-5
G20E-5
G20P-5
GC20E-5
GC20P-5
18,100 ± 350 Kpa
2,625 ± 50 psi
15,500 ± 350 Kpa
2,250 ± 50 psi
D25S-5
G25E-5
G25P-5
GC25E-5
GC25P-5
19,500 ± 350 Kpa
2,825 ± 50 psi
15,500 ± 350 Kpa
2,250 ± 50 psi
D30S-5
G30E-5
G30P-5
GC30E-5
GC30P5
G32E-5
G32P-5
21,550 ± 350 Kpa
3,125 ± 50 psi
15,500 ± 350 Kpa
2,250 ± 50 psi
D33SC-5
D35SC-5
G33P-5
G35P-5
24,000 (+500,0) Kpa
3,490 +75,-0 psi
15,500 ± 350 Kpa
2,250 ± 50 psi
(1) Torque for bolts that hold control valve sections
Together .............40.5±2.5 N·m (360±24 lb·in)
(2) Torque for nut......... 4.9±0.5 N·m (43±12 lb·in)
(3) Torque for nut......... 4.9±0.5 N·m (43±12 lb·in)
(4) Torque for plug.............. 1±0.5 N·m (9±5 lb·in)
(5) Torque for screws... 5.4±2.7 N·m (48±24 lb·in)
(6) Adjust main relief valve pressure for lift as
shown above. See Relief Valve Pressure Check
in Testing And Adjusting.
(7) Adjust secondary relief valve pressure for tilt
and side shift as shown above. See Relief Valve
Pressure Check in Testing And Adjusting.
(8) Torque for plug......5.5±2.5 N·m (492±24 lb·in)
(9) Torque for plug....63.7±2.5 N·m (564±24 lb·in)
(10) Torque for plug........................55.5±2.5 N·m
(492±24 lb·in)
(11) Torque for plug......30±2.5 N·m (260±24 lb·in)
(12) Adjust tilt and side shift flow rate by using 6mm
hex-wrench if required. See Flow Control Valve
Adjustment in Testing And Adjusting.
(13) Torque for plug....................... 63.7±2.5 N·m
(564±24 lb·in)