Specifications

Operation Section

-86-

After Starting the Engine

Observe all indicator lights and gauges frequently

during operation, to make sure all systems are

working properly. The entire indicator lights will

come ON with the ignition switch in the ON position

before the engine is started.

Diesel (12V)

LPG/GAS (12V)

1. The engine oil pressure indicator light (1), will

not come ON with the engine running, unless

there is low or no oil pressure. Stop the engine

immediately, if the light comes ON.

2. The alternator indicator light (2), should not

come ON during normal operation. The

alternator is not charging if the light comes ON

with the engine running.

3. The spark-ignition

G420/424F(E)/G424I(E)/G430FE engine

MIL(Malfunction Indicator Light)(3) will not

come ON with the engine running, unless the

fault or faults are stored in the memory of the

engine control module(ECM). Stop the engine

and check the electric engine control system if

the light comes ON. Refer

G420F(E)/G424F(E)/G424I(E)/G430FE

Engines of this section.

4. The diesel engine water in fuel filter indicator

light(4), will not come ON with the engine

running, unless water in fuel filter exceeds

100cc. Stop the engine immediately and drain

the water if the light comes ON.

5. Observe the fuel level gauge (5) for fuel level

in the tank.

6. The engine coolant temperature gauge pointer

(6) will be in the green band with the engine

running, unless the coolant temperature is

excessive.

7. The transmission oil temperature gauge

pointer (7) will be in the green band with the

engine running, unless the oil temperature is

excessive.

8. Observe the hour meter (8) to make sure it is

operating properly.

6 7

5 6 7