Service manual

G420F(FE) Service Manual Chapter 5. Engine Management System (EMS) 198
Schematic Diagram
[CIRCUIT DIAGRAM]
[HARNESS CONNECTORS]
ECTS
ECM
C11
ECTS
3
2
B1 - GND
B15 - ECTS SIGNAL
to Cluster
1
123
Installation
1. Apply sealant LOCTITE 962T or equivalent to
threaded portion.
2. Install engine coolant temperature sensor and
tighten it to specified torque.
Tightning torque
Engine coolant temperature sensor "
15~20Nm (150~200 kg.cm, 11~15 lb.ft)
3. Connect the harness connector securely.