Service manual

G420F(FE) Service Manual Chapter 3. Engine Mechanical System
117
18. Install oil level gauge assembly.
1) Install a new O-ring on the oil level gauge.
2) Apply engine oil on the O-ring.
3) Install the oil level gauge assembly (A) with
the bolt.
Tightening torque
12~15Nm (120~150kgf.cm, 9~11lbf.ft)
19. Install cylinder head.
19. Install timing belt.
20. Remove engine stand.
21. Install flywheel housing.
22. Install flywheel.
Tightening torque
120~130Nm (1200~1300kgf.cm,89~96lbf.ft)