Product Manual

1. Roll the loaded Doorminator
®
into position so that
the door hinges line up with the mounting surface in
the door frame. WARNING: Do not push directly on
the door to move it. It may be dislodged from door
carrier and tip over possibly resulting in damage or
injury
.
2.
T
o move hinge side of door laterally closer to the
frame, step down and sideways on wheel pedal to
activate transverse wheel.
3. To raise door turn the crank clockwise.
To lower door, turn the crank counter-clockwise.
4. To tip door side to side, use carrier tilt handle.
5. To tip door front to back, use door tilt handle.
6. When hinges line up properly, install screws to
fasten door into frame.
OPERATION: INSTALLING THE DOOR
10