World’s Best OPERATOR’S MANUAL For Model 40100 WARNING Read and become familiar with this manual BEFORE operating unit. Before operating this equipment, thoroughly read this set of instructions, make sure you understand them, and only then follow the step-by-step directions. Failure to do so could result in serious property damage and / or serious bodily injury. MADE BY www.paragonpromfg.com Form 42-18-00-00 © 2018 Paragon Pro Manufacturing Solutions, Inc. All Rights Reserved.
To our valued customer, Thank you for choosing a product by Paragon Pro Manufacturing Solutions. We are pleased that we are able to provide equipment to make your work easier. Our efforts are focused on producing the finest quality equipment of which we are capable. We make sure to spend extra time and effort on our design and production in order to reduce your time and effort spent using the product. We take pride in providing the best for our customers.
CONTENTS Warnings / Instructional Information . . . . . . . . . . . . Page 1 Care & Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 User Components & Specification . . . . . . . . . . . . . . Page 3 Initial Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 4 Terms & Definitions . . . . . . . . . . . . . . . . . . . . . . . .Pages 5-6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 7-12 Parts Index . . . . . . . . . . . . . . . . . . .
Warning Read and follow these warnings and the instructions that follow. Failure to do so could result in serious property damage and/or serious bodily injury. • Never release the roller pads while a door is loaded on the Doorminator®. The door will lose its support and tip or fall possibly resulting in personal injury or property damage. • When using the Doorminator® as a dolly to transport doors, proceed slowly and carefully, especially around corners to avoid tipping.
MAINTAINING YOUR DOORMINATOR® Occasionally lubricate wheels and casters, hinge points, pull pins, and frame latch. Store Doorminator® in a dry place. Adjust door tilt and carrier tilt handles as needed by tightening or loosening their nuts and bolts. Take reasonable care to avoid damaging the Doorminator® when transporting it.
USER COMPONENTS and SPECIFICATIONS Model 40100 Frame Assembly Casters Lower Door Hook Carrier Specifications: • Doorminator® Load Limit 400 lbs. • Maximum Door Dimensions: 4’W x 10’H x 2”D • Net Weight: 111 lbs. • Model No. ____________________ Serial No.
INITIAL ASSEMBLY - Model 40100 1. Unpack unit. 4. Bolt on crank handle to door carrier. 2. Bolt in two casters with fasteners. 5. Hang carrier on storage pin and fasten to frame with storage latch pull pin. 3. Release wheel base catch and lift the frame to upright position until brace pull pin engages in locked position. 6. Clamp the lower door hook in storage position on frame as shown.
TERMS & DEFINITIONS Knob / Latch Edge of Door Hinge Edge of Door ALWAYS Center Carrier w/ doors Hinge Pins away from Doorminator® Knob / Latch edge of door always into notch of side shift lock 5 LEFT SWING
Knob / Latch Edge of Door Hinge Edge of Door RIGHT SWING ALWAYS Center Carrier w/ doors Hinge Pins away from Doorminator® Knob / Latch edge of door always into notch of side shift lock 6
OPERATION: LOADING THE DOOR 1. Begin with door 18” - 20” away from and leaned against the wall (with hinge pins toward wall) and supported on lower corners by laths or similar spacer shims to provide easy access for carrier door shoe. 4. Release carrier slide box latch, swing top of carrier left or right and lift it off of storage pin. 2. Position Doorminator® near the door with the upright frame at the latch side of door and the stepdown transverse wheel at the hinge side of door. 5.
OPERATION: LOADING THE DOOR 7. While holding the door carrier against door with one hand, move wheelbase into position until latch edge of door is engaged in notch of the side shift lock as shown. 10. Swing the first roller pad (furthest from wall) around to horizontal position and grasp door with two hands. 8. Lock caster brake to hold in position. 11. With your foot braced against the door carrier, carefully pull door toward you to the vertical position against the first roller pad. 9.
OPERATION: LOADING THE DOOR 13. Crank carrier handle clockwise to raise door for transport. 14. You may choose to use lower door hook for added security when moving doors longer distances. 16. When using the Doorminator® as a dolly to transport doors, proceed slowly and carefully, especially around corners to avoid tipping. 15. When not in use, the lower door hook clamps onto frame upright tube for storage.
OPERATION: INSTALLING THE DOOR 1. Roll the loaded Doorminator® into position so that the door hinges line up with the mounting surface in the door frame. WARNING: Do not push directly on the door to move it. It may be dislodged from door carrier and tip over possibly resulting in damage or injury. 4. To tip door side to side, use carrier tilt handle. 5. To tip door front to back, use door tilt handle. 2.
OPERATION: INSTALLING THE DOOR 7. After door is securely mounted on its hinges, release roller pads by pulling back on latch bar. 9. Crank the handle counter clockwise until carrier is free from the bottom of door. Then while holding carrier with one hand so it will not tip off and fall, move it together with Doorminator® frame away from the door. 8. Flip the roller pads around to the vertical position. 10.
OPERATION: FOLDING & TRANSPORT 1. To fold unit for transport and compact storage begin with roller pads hanging in the vertical position. Pull on the brace slide box pin to release and carefully lower the upright frame down until it latches with the wheelbase. 2. Now the Doorminator® can be easily rolled to its storage location. If unit is leaned against wall for storage - be sure to lock both caster brakes. Be sure latch engages completely.
PARTS INDEX COMPLETE DOORMINATOR® ASSEMBLY 13
PARAGON PRO MANUFACTURING SOLUTIONS INC LIMITED WARRANTY TELPRO INC products manufactured by PARAGON PRO MANUFACTURING SOLUTIONS INC are warranted to be free from defects in material and workmanship under normal use for one year from date of purchase. NOTE: The following components of the PANELLIFT® Model 439 Drywall Lift are warranted to be free from defects in material and workmanship under normal use for three years from date of purchase.
OTHER PRODUCTS Check out these other back-saving tools made by Paragon Pro. Model 3070 Install and remove heavy, awkward doors: 4’ wide, 7’ tall, up to 160 lbs. Fully adjustable levers allow for perfect alignment and pain free installations. No need to hire extra help, one person installations saves you money! Model 1814 Model 1361 TROLL® Carts Model 1361 or 1814 are the most versatile carts you will find. Convert to a flatbed or use upright - either way store or transport up to 4,000 lbs. of material.
This product contains trace amounts of the following items which are known to cause These chemicals are not hazardous under product's intended use. Please review CAS# for more information.
Questions about assembly? Can’t find a part? Need some other help? Call us: 1(800)441.0551 1(800)448.
