Owner manual

Security Level Planning Guide
The sample below was used to create security level 02 as described in Section 3.5.2. Use the guides on the
following pages to simplify planning and organizing your different security levels before starting to program the
different levels in the software.
1. Name ALL relays that the system will control. Remember that the software program will only allow
you to enter 12 characters in the relay name field, so you may have to abbreviate in some cases.
2. Complete a chart for EACH security level that needs to be created. Copy the blank charts if
necessary. You can create up to 29 security levels starting with level 02. Security levels 00
(always deny access) and 01 (always grant access) are not programmable.
Relay 11:
Relay 14:
Relay 13:
Relay 12:
Relay 15:
Relay 16:
Page 80 1835-066-N-7-13
Relay 17:
Relay 18:
Tracker Command
Relay 1:
Relay 3:
Relay 6:
Relay 5:
Relay 4:
Relay 7:
Relay 8:
Relay 9:
Relay 10:
Tracker Command
Relay 2:
Visitor Vehicular Gate
Track er Command Tracker Command
South Entry
North Entry
West Entry
Elevator 1 Card
Elevator 2 Card
Elevator 3 Card
Resident Vehicular Gate
Resident Pedestrian Gate
Office
Pool
Laundry Room
Exer ci se R oom
Relay 0:
(1833, 1835, 1837 Only)
SMTWTFS012345678910111213141516 1817
Time
Zone
Start Time - Stop Time
1
4
3
2
SECURITY LEVEL DAYS RELAYS
El
evator 4 Card Service ENtrance
12:00 AM - 11:59 PM
9:00 AM - 5:00 PM
8:00 AM - 10:00 PM
2
X
XXXXXX
XXXXXXX
XXXXXX
X
XXX
XXX