User guide

System Parameters Programming Section 2.4
Description Command Section Default Value
Relay Strike Time * 0 3 2.4.1 1 Sec
Tone Open Numbers * 0 5 2.4.2
Relay 1: 9 8 7 6
Relay 2: 5 4 3 2
Answer Incoming Call on X Rings * 1 8 2.4.3 6
Devices Section 2.5
Description Command Section Default Value
Program Number of RS-485 Devices * 0 9 2.5.1 0
Program RS-485 Device Off-Line Function * 0 7 2.5.2 0
Program Access Code * 7 0 2.5.3 Empty
Delete Access Code * 7 1 2.5.4 N / A
Delete All Access Codes * 7 2 2.5.5 N / A
Program Temporary Access Codes * 7 3 2.5.6 Empty
Delete Temporary Access Code * 7 4 2.5.7 N / A
Delete All 10 Temporary Access Codes * 7 5 2.5.8 N / A
Time Functions Section 2.6
Description Command Section Default Value
Program Calendar Chip * 3 3 2.6.1 Empty
Program Relay Hold Schedule * 3 5 2.6.2 Empty
Program Time Zones * 3 6 2.6.3 Empty
Miscellaneous Section 2.7
Description Command Section Default Value
Restore Defaults * 9 0 2.7.1 N / A
Erase Transaction Log * 9 1 2.7.2 N / A
Page 24 1838-066-D-1-12