User Manual

3.3.5 Touch-tone / Rotary-dial

This programming sequence will set the remote call station to dial out in either a touch-tone or rotary

format. Generally, this will be set for touch-tone.

Factory setting = touch-tone.

NOTE: This programming step is only used when a DKS Remote Call Station is connected to

the 1838 system.

1. Press *

0 7 and enter the four digit MASTER CODE _ _ _ _ (beep).

2. Enter 0

* (beep) for touch-tone or enter 1 * (beep) for rotary.

3. Press 0

# TOGETHER to end this programming step (beeeeeep).

1838-065

-U-4-13 Page