Instructions / Assembly

Chain installation

Close the gate. Connect the tie rod with the chain using its chain link; fasten the tie rod to the door connecting plate with washers and

nuts as shown in Figure 8. If necessary, the elasticity of chain can be adjusted through the tie rod at both ends and the chain can be

shortened. If it needs to be lengthened, make sure to use the same type of chain so it moves easily but securely.

If the door frame is square, please use the square screw as shown in Figure 9:

Installation of chain, small and big sprocket is shown in Figure 10:

Figure 8

Figure 9

Chain

Chain link

Tie rod

Flat washerφ8

Spring washerφ8

Spring washerφ6

Gate

Flat washerφ6

Nut M8

Tie rod

Nut M6

Square screw

Figure 10