Instructions / Assembly
10
● Pair with up to 20 different 433.92 MHz remote controls and with wireless keypads.
● Compatible with and easily connected to alarm lamps, external control buttons, and infrared photocell sensors.
● Auto-close functionality for improved security.
Features
Step 1
Ensure your gate can glide back and forth smoothly by hand before installing the gate opener.
Step 2
Toggle the Travel Direction Switch on the control board according to the installation location of your automatic gate opener. Flip the switch to FWD for
right-mounted gate openers. Flip the switch to REV for left-mounted gate openers.
Step 3
Wire the control board to your automatic gate opener and any compatible accessories according to the Connections and Indicators Diagram in
the Product Overview section of this manual and the instruction manuals for the other devices.
Step 4
Press the test button, Travel direction indicator (open) will light when the gate is opening; Travel direction indicator (close) will light when the gate
is closing.
Gate Opener Installation
The included remote control uses single-button mode. Each button on the remote control can pair with one
control board. When pressed, the paired button will open the gate if the gate is closed, close the gate if the
gate is open, and stop the gate if the gate is traveling.
CAUTION: To prevent accidents, DO NOT pair one button with two different control boards.
The transmitter has been matched to the door opener when it leaves the factory, No need to match again when the product is received.
Remote Control
Step 1
Press the Remote Pair Button (AN1) on the control board. The Remote Signal Indicator (LED2) will come on.
Step 2
Press the button on the remote control to be paired. The Remote Signal Indicator will go off.
Step 3
Press the same button the remote control. The Remote Signal Indicator will flash quickly then go off. DONE!
Remote Control Pairing:
Hold Remote Pair Button (AN1) on the control board until the Remote Signal Indicator (LED2) goes out. DONE!
Remove All Paired Remote Controls: