Installation Guide

1
Lock bolt and
latch assemblies
Lock bolt and
latch assemblies
B
D
Door Shield Installation
1. Slide the Door Shield
onto the door posi-
tion so the holes will go
over the lock bolts.
2. Using the supplied
2-1/2” screws , secure
the Door Shield to the
door slab using the hole
above and below screw
lock bolt holes.
B
D
C
C
E
C
Weather
stripping
Hinge Shield Installation
NOTE: Hinge Shields
are not included in the
MINI Set. Extra included
screws in MINI Set
should be used to secure
the hinges
1. With the door open, re-
move the two screws from
the middle jamb side hinge
plate, closest to the weath-
erstripping. Pre-drill these
holes with the 9/64-inch
drill bit. Now drive a 3-1/2
inch screw into ONE of
these holes, ensuring the
screw heads come to rest
ush the hinge plate.
2. Position the Hinge
Shield over the hinge so
that the hole with the re-
moved screw lines up with
one of the holes near the
center of the Hinge Shield.
Drive one of the 3-1/2 inch
screws through the hole,
insuring that the screw
head comes to rest ush
against the hinge Shield.
E