Manualshelf

Installation Guide

ManualsBrandsDoor Armor ManualsDoor Jamb Security & Repair KitsEZA-DSL-10102
12345678910
S
A
F
E
T
Y
I
N
F
O
R
M
AT
I
O
N
WA
R
N
I
N
G
• The use of work gloves and safety glasses is strongly recommended while installing this product.
Wood and metal shaving/splinters can cause serious bodily injury.
• As with all products requiring installation, to reduce the possibility of accidental injury to you or
others
FOLLOW ALL INSTALLATION INSTRUCTIONS contained herein accurately and carefully.
P
R
E
P
A
R
AT
I
O
N
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts at 1-888-582-2294 or visit
www.djarmor.com.
Note: It is recommended that Door Jamb Armor components be painted before being installed.
They can be touched up as necessary after installation.
1.
Using plain steel wool or a very fine emery cloth, gently rough the surface of the piece
to be painted. You only want to rough the surface and break the gloss so that your paint will
adhere to the surface. Do not totally remove the existing powder coating.
2.
Clean the surface with a tack cloth or a cloth with a cleaner on it that will not leave a
residue. Rubbing alcohol will work well for this application. You can also use mineral spirits
but make sure that whatever you use does not cause an adverse reaction with the powder
coating.
3.
When components are clean and free of debris, you are ready to paint your pieces.
4.
Ensure that all components are completely dry before handling or installing them.
P
A
I
NT
I
N
G
I
N
S
T
R
U
C
T
I
O
N
S
T
oo
l
s
r
e
qu
i
r
e
d
f
o
r
a
ss
e
m
b
l
y
Variable speed drill, with screwdriver
adapter and bits
Pry bar
Carpenter’s level
Claw foot hammer
Soft face hammer
Phillips screwdriver
Flathead screwdriver
Pair of work gloves per person assisting
in installation
Pair of safety glasses per person assisting
in installation
9/64 in. and 11/64 in. drill bits
1/2 in. to 3/4 in. drill bit
Razor knife
Caulk
•
•
•
•
•
•
•
•
•
•
•
•
•