User's Manual

July 16, 2020

Datasheet

802.11n version 2.0

Capabilities

• 802.11 dynamic frequency selection (DFS) as an AP and Client

• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), Maximal ratio

combining (MRC), Cyclic shift diversity (CSD), Frame aggregation, block ACK,

802.11e compatible bursting, Spatial multiplexing, cyclic-delay diversity

(CDD), low-density parity check (LDPC), Space Time Block Code (STBC)

• Phy data rates up to 450 Mbps (40 MHz channel)

Operating Modes

AP, Client, and Adhoc modes for Access Point, PtP, PtmP, and Mesh networks

MAC Protocol

TDD with Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)

Wireless Error Correction

FEC, ARQ

Wireless Data Security

128 bit AES, WEP, TKIP and WAPI hardware encryption. Support for IEEE

802.11d, e, h, i, k, r, v, w and time stamp standards

FIPS Certification

• Small packet size (96 bytes) in AES encryption at full packet rate.

• FIPS 140-2, Level 2 (Temper Evidence Shield), Loop back mode to facilitate

FIPS AES certification.