Users Manual

Transmitter Spurious Emission
Suppression
-40 dBc (Minimum)
RF Power control by Driver
In 0.5 dBm steps. Accuracy of power calibration ±2 dBm
RF Hardware Disable
Pin 20 of miniPCI-E interface. (Required for FAA compliance)
Control for External Power Amp
Available as an optional configuration
Spectral Analysis
8 bit resolution spectral FFTs available for software analysis
PHYSICAL, ENVIRONMENTAL AND OTHER SPECIFICATIONS
Antenna Ports
3 Ports (50 Ohms) with MMCX connectors.
Optional configuration with U.FL connectors available on request
Host Interface
miniPCI-Express 1.2 Standard
Host CPU Board
Any CPU board with Industry standard miniPCI-Express interface with minimum 6 mm
connector height
Operating Voltage
3.3 Volts from miniPCI-Express connector
Power Consumption
5W @ Max power, in continuous data transfer mode on all 3 chains
3.5W @ 25 dBm power, in continuous data transfer mode on all 3 chains
2.5W @ 20 dBm power (ETSI max), in continuous data transfer mode on all 3 chains
0.9W in continuous data receive mode
250 mW in Sleep mode
Shield case temperature range
(Operating)
0°C to +60°C (Enterprise/Indoor “*E-DB-3” models)
-40°C to +60°C (Outdoor “*O-DB-3” models)
-40°C to +80°C (Rugged “*M-DB-3” models)
The System’s thermal design should ensure that the transceiver’s case temperature is
maintained within these specifications.
Humidity (Operating)
0% – 95% (Non-condensing)
Dimensions
30 x 50 x 7 mm, 14 grams (Rugged models).
Mechanical drawing and 3D-CAD files available upon request
Regulatory Requirements
Designed and Verified to meet various regulatory requirements. Formal testing and approval
is required based on the Integrator’s particular host platform and antenna type. The Integrator
is also responsible for obtaining all required regulatory approvals in target markets for the
finished product.
FCC ID
2AG87ACM-DB-2M
CE/ETSI
11ac models in AP and Client modes with full DFS – in conformity with all the requirements of
the European Directive 1999/5/EC – EN 301 893 V1.8.1, EN 300 328 V.1.8.1, EN 301 489-1
V1.9.2, EN 301 489-17 V2.2.1, EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011+
A2:2013
Industry Canada (IC)
21411-ACMDB2M
RoHS/WEEE Compliance
Yes. 100% Recyclable/Biodegradable packaging