ACM-DB-2M Rugged/Military grade 2.4/ 2x2 MIMO Wi-Fi® Radio Transceivers Features • • • • • • Qualcomm-Atheros QCA9890-BR4B Chipset with Extended Temperature Range Up to 1.3 Gbps Throughput with 3x3 MIMO Technology Calibrated High Power 2.4 GHz (29 dBm) afor Extended Range 802.
Installation and Usage The ACM-DB-2M has been FCC certified for indoor usage with Superbat 3-dBi rubber-duck antennas (WA2-1321-S02SP1-030 in the 5-GHz bands, and WA2-995-S02SP1-030 antennas in the 2.4GHz band). The ACM-DB-3 mates with a standard PCIE-mini slot and integrates with the Ath10k software driver which is preinstalled in Linux-based systems.
TECHNICAL SPECIFICATIONS Model No. ACM-DB-2M(Rugged/Military Applications, 802.11ac) MAC Chipset QCA9890-BR4B with Extended Temperature range for Outdoor and Rugged models) Open Source Linux Driver ath10k OpenWRT (Wireless Router/Linux OS) Software Support Center Frequency Range 2.412 GHz ~ 2.484 GHz This varies by the regulatory domain Channel Bandwidth/(No. of Nonoverlapping Channels)* 20/(27), 40/(13) and 80/(6) MHz channels (5.x GHz) 20/(3), and 40/(1) MHz channels (2.
2.4 GHz (20 MHz Channel) 802.11b, Single Stream, STBC 1 Mbps CCK 0.8 29 -100 802.11g, Single Stream, STBC 6 Mbps BPSK 5.5 29 -98 802.11g, Single Stream, STBC 24 Mbps 16 QAM 18 29 -90 802.11g, Single Stream, STBC 36 Mbps 16 QAM 24 27 -87 802.11g, Single Stream, STBC 48 Mbps 64 QAM 31 26 -84 802.11g, Single Stream, STBC 54 Mbps 64 QAM 32 26 -82 802.11n, HT20, 3 Streams MCS16 BPSK 18 29 -92 802.11n, HT20, 3 Streams MCS18 QPSK 54 29 -86 802.
Transmitter Spurious Emission Suppression -40 dBc (Minimum) RF Power control by Driver In 0.5 dBm steps. Accuracy of power calibration ±2 dBm RF Hardware Disable Pin 20 of miniPCI-E interface. (Required for FAA compliance) Control for External Power Amp Available as an optional configuration Spectral Analysis 8 bit resolution spectral FFTs available for software analysis PHYSICAL, ENVIRONMENTAL AND OTHER SPECIFICATIONS Antenna Ports 3 Ports (50 Ohms) with MMCX connectors.
FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 External antenna with gain ANT0: 7dBi, ANT1: 7dBi FCC Regulatory Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic DevelopmentCanada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
