Thank you for purchasing this Donner Belt Drive Tumble. Please read the user Manuel carefully before use and keep It In a safe pace for future reference. If you need any assistance, please contact our customer support mall: This product can bs used only In the councilors where the product Is sold, Make sure that the operating voltage and the plug of the AC adapter of te product are correct for tha country you live in. ® Boors uss, please make sure that the product Is completes without any damage.
* Donner DP-500 ia a Alt Drive Turntables designed for analog playback of vinyl records. Assemble your tum table to use tt for the first time. Donner DP-500 tum table does not have built-in speakers. To listen to audio on vinyl records, ether use the RCA audio cable (supplied) t6 connect to an audio devices of use the BLUETOOTH® function to connect fo a BLUETOOTH wireless technology-enabled audio device, such as wireless speakers or wireless headphones.
£5 Tum table Platter Place the platter on the center spindle while you are assembling your tum table. It has a Belt Driven wound around an the backside. : Conner Spindle 3 Head shell with Audio Technical Cartridge (AT-3600L) + Attach the protector to protect the stylus when the product Is not In use. + Do not touch the stylus of the cartridge with your finger. + Do not allow the cartridges stylus to bump against the platter or the edge of the recon.
£75 Tonearm Lift Lever Push the It lever upward to raise the tonearm from the arms park or put the It lever downward to drop the tonearm to the arms park. i Anti-Squats Control Knob While the record Is playing, a force acts on the stylus tip to pull Inward. This force can be counteracted by setting the same values for the anti-skate and the tracking force. ¢% Trucking Force Gauge Ring Use to guide the adjustment of the tracking force.
AUX Jack of an amplifier, set this switch to the LINE position. + Select ‘phonon, the audio signal will bypass the Internal per-ampifier without any processor. Then tum table haa t be connected with an textual prey-ampiifier for music playback. + Select "Line", the audio signal will be processed by an internal per-amplifier. The tumble can be directly connected with active speakers for music playback. {i Stereo Output Socket Gannet the RCA audio cable.
1.5et the platter on the spindle * To avoid damaging the center spindle when seating the platter, align the positions of the spindle and the platter's hols, and then slowly seat the patter. * Make certain that the poster Is fly seated on the cents spindle. 2.Hold the platter steady and carefully slip the belt over the motor pulley. Note = Ba careful to not let the drive belt twist.
(X) Counterweight end is too heavy, tum the counterweight Inward to adjust a (X) Head shell end ls too heavy, tum the counterweight backward to adjust 7. Rstumn the tonearm to the tonearm rats and latch the clamp getting tracking force « While supporting the counterweight so that It does not move, tum the tracking force gauge ding so that Its “0” position lines up with the center line on the back of the tonearm, Be sure not to tum together with ths counterweight.
9.Setting the anti-skate adjustment. * While the record is playing, a force acts on the stylus tip to pull it inward, This force can be counteracted by setting the mass values for the anti-squats and the tracing force. * Adjust the anti-skate control dis to have the same values es the tracking force values. The standard tracking fora value for the cartridge provided with this product fs 3.5. 10.Attaching the dust cover « Insert the supplied dust cover hinges to the hinge packets on the dust cover.
ono) [une roo) une PHONON Attention 1 you are only using the BLUETOOTH connection and not connecting tha tumble to another device using the audio cable, place the audio cable so that its metal tips do not touch each other or any metallic parts farm racks or other devices. Than, Setting the per-amplifier selector switch (OUTPUT SELECT switch) ta LINE to usa the tum table.
CONNECTING TO COMPUTERS WITH USB INPUT * You can usa a USB cable (supplied) fo connect your tum table to a computer, and than record audio tracks from the vin record to your computer without the need for special drivers. + Audacity (refer to for details) and other compatible third-party recording software packages ars available, allowing you to record farm tha product to your computer. Bs sure to set the amplifier selector switch (OUTPUT SELECT switch) ta the "LINE" potion.
2. False the tonearm by Finding the tonearm It control lever to the UP position. 3. Position the tonearm over the desired location (groove) on the record, 4. Lowar the tonearm by moving the tonearm If control lever tithe DOWN position. The tonearm descends slowly onto the record and play begins. * Do not subject the product to strong impact during playback. PAUSING THE VINYL RECORD Aer lowering the volume of the amplifier, speakers, sufficiently, lif the tonearm with the tonearm it control lever.
Do not subject this apparatus to strong Impact In case of emergency, disconnect the AC adapter quickly. « Do not place any objects filed with liquids, such as vases, on this apparatus. To prevent fire, do not place any naked flame sources {such as lighted candies) on this apparatus. Do not Install this apparatus In a confined space such as a bookcase or similar unit. Install the apparatus only In the place where ventilation ls good.
The peatier does not spin Is the AC adapter connected to the outset. Connect AC adapter to the outlet. Has the AC adapter’s plug come off, Check whether or not the plug le properly detached to the AC adapter. The peatier spins, butters Is no sound or the volume is not loud enough. Is the cartridge's protector steel in place. Remark the cartridge's proctor. Is the tonearm in the lit position. Lower the tonearm. Are the function settings and Input for connected equipment (am pilfer, etc.) spectacle correctly.
The sound when the record 6 playgirl ls ether too fast or 00 slow Are the speed settings for the product comet, Use the platter speed buttons to select the corm act speed for the types of record being played. You cannot pair via the BLUETOOTH wireless technology . If thees are playback devices, which support BLUETOOTH wireless technology nearby, that have the BLUETOOTH function enabled, but some of them are not the device with which you want to pair, disable their BLUETOOTH function and try pairing again.
