Operating Guide

Description The Do n n ACM7 seismic clip is designed to provide the most robust hold in the most stringent
seismic design categories.
ACM7 Seismic Clip
Features and Benefits – Meets or exceeds all national code requirements with 7/89 wall molding
– Offers an aesthetically attractive option to traditional 29 angle molding
– Fulfills requirements for IBC Seismic Design Categories C, D, E and F
– Provides evidence of compliance (and greatly exceed) ICC Evaluation Service, Inc. (ICC-ES) AC156 and
AC368 requirements
– Provides support on either side of the web and around the bulb of the tee
– Laboratory-tested to greatly exceed all structural and seismic requirements including tension, compression and
tee fallout
– Either wing can be snipped off to fit corners and other tight spaces
– The clip adjusts easily to accommodate tees that intersect the wall at an angle other than 90 degrees
– No special fasteners required
– Lifetime limited warranty
Applications – All interior general use areas
– All main D
o n n suspension systems, DX
®
/DXL
™
, Fi n e l i n e
®
(DXF), Fi n e l i n e
®
1/8 (DXFF), Ce n t r i C i t e e
™
(DXT),
CE (Controlled Environment), DXW, DXLA
™
, and ZXLA
™
(Environmental), include the code-compliant
intermediate-duty and heavy-duty main tees for Seismic Design Categories C, D, E and F.
Construction
ACM7 Clip, Tight Wall ACM7 Clip, Floating Wall
Submittal Sheet
Donn
®
Suspension Systems
7
/8"
tee
ACM7 seismic clip
7
/8" x
7
/8" wall molding
7
/8"
tee
ACM7 seismic clip
7
/8" x
7
/8" wall molding
ACM7 Seismic Clip