Donica Aviation Engineering Co., Ltd. DT-XX-XXX v.IR wCube-1000 User Manual Product Model: wCube-1000 Part Number: 800-P01-100 Doc Number: DT-XX-XXX Revision: IR Prepared by/Date Reviewed by /Date Approved by/Date 11/13/2020 11/13/2020 11/13/2020 Donica Aviation Engineering Co., Ltd.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Table of Contents 1. 2. 3. 4. 5. 6. 7. Introduction ...................................................................................................... 1 Scope ................................................................................................................ 1 Abbreviation .................................................................................................... 1 System Specification .............................................
Donica Aviation Engineering Co., Ltd. 1. DT-XX-XXX Introduction wCube-1000 (hereafter referred to as wCube) system is a customized portable cabin Wi-Fi system to integrate Tencent and Aircom portal. This user manual is referred for the integration and operation of wCube. 2. Scope This user manual mainly describes the basic operation and configuration of wCube. 3.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX (16TB is not available on market yet) Model: FB-24-RJ45 RJ45 Port, to be used for Maintenance in the Ethernet 1 x 10/100/1000 Mbps first 100 sets shipment for HKA, and for Internet Access trial in American Southwest with a different internal network configuration. USB Video 1 x USB2.
Donica Aviation Engineering Co., Ltd. Size Weight Work temp. Storage temp. Humidity 322.1*285.1*130.1mm (including external antenna) ≤5 kg -15~ +55 degree Centigrade -40~ +70 degree Centigrade ≤ 95%，no condensation Flammability Per CCAR 25.853 Qualification CE, FCC MTBF 5. 322.1*265.1*130.1mm DT-XX-XXX Appendix F ≥25000 Hours System Interface Desc. wCube is a portable cabin Wi-Fi and inflight entertainment system, with main functions as following: Cabin Wi-Fi service.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Figure 5-1 wCube overview 5.1 Power Switch Figure 5-2 wCube Power Button The power switch on the front panel of wCube is shown in Figure 5-2. For the flight safety consideration, the power switch of wCube adopts self-locking switch with two state positions Power On and Power Off. Push the power switch to the Power On position to make the power staying On and push again to the Power Off position to make the power staying Off. 5.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Figure 5-3 28VDC Power Input 5.3 RJ45 Ethernet Interface The RJ45 ethernet interface of wCube, as shown in Figure 5-4, is used as maintenance ethernet interface or external WLAN interface. Figure 5-4 RJ45 Interface 5.4 SSD Storage Interface Open the front panel as shown in Figure 5-5, and then the SSD interface is shown as Figure 5-6. When inserting SSD, keep the surface with marking “UPSIDE” as upside and the Type C interface as inside. @2020 Donica.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Figure 5-5 Interface Front Panel Figure 5-6 SSD Interface 5.5 Wi-Fi Switch As shown in Figure 5-7, the Wi-Fi switch is used to reset Wi-Fi access point in wCube. @2020 Donica. All Rights Reserved.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Figure 5-7 Wi-Fi Switch 5.6 4G Switch The 4G switch of wCube is shown in Figure 5-8. For the flight safety consideration, the 4G switch of wCube adopts self-locking switch with two state positions 4G module On and 4G module Off. Push the switch to the 4G On position to make the 4G module staying On and push again to the 4G Off position to make the 4G module staying Off. Figure 5-8 4G Switch 5.7 USB Interface As shown in Figure 4-9, the USB2.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Figure 5-9 USB Interface 5.8 VGA Interface As shown in Figure 5-10, the VGA interface is used to connect VGA display to show system maintenance window of wCube. Figure 5-10 VGA Interface 5.9 SIM Card Interface As shown in Figure 5-12, there are two SIM card interfaces in wCube. @2020 Donica. All Rights Reserved.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Figure 5-11 SIM Card Front Panel Figure 5-12 Two SIM Card Interfaces Figure 5-13 SIM Card Orientation 6. Test Guide 6.1 Test Equipment and Tools Table 6-1 Test Equipment and Tools Item Desc. Amount Specification Notes No. (1) wCube 1 Model：wCube-1000 Part Number：800-P01-100 (2) AC Power 1 100~240V，50/60Hz (3) AC-DC Power Convertor 1 LPV-100-24 INPUT: 100~240V 2.2A 50/60Hz OUTPUT:24V 4.2A (4) Ethernet Cable 1 General @2020 Donica.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Item Desc. Amount Specification Notes No. MS Windows7 or above version Wireless ethernet card 1000 Mbps Ethernet port SSH application, e.g. SecureCRT_6.5.3.490 (5) PC 1 (6) USB disk 1 (7) SIM Card 2 4G SIM cards (8) VGA Display 1 VGA display with VGA cable (9) USB Keyboard 1 Optional (10) USB Mouse 1 Optional (11) USB Hub 1 Optional (12) Test Terminals 2+ Optional Android / iOS smart phone or PAD 6.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Figure 6-1 Test Environment 1. As shown in Figure 6-1, build up the test environment with VGA Display, USB Hub, USB Mouse and USB keyboard as optional. 2. Set the static address of ethernet cable port on PC to 10.10.10.11/24 and access wCube maintenance window page by URL http://10.10.10.10/CMT in the browser, and then access wCube operating system via SSH tool (SSH 10.10.10.10, User/password： root/donica_wifi). 3.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Figure 7-1 OAM Home Page Step 2 Click on Maintenance on the upper-right corner to login maintenance pages, as shown in Figure 6-2. Figure 7-2 Maintenance Window Login Step 3 Input password “2731” to login the home page of maintenance window, as shown in Figure 7-3. @2020 Donica. All Rights Reserved.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX Figure 7-3 Maintenance Home Page Step 4 Select “SETTINGS” -> “Initial Settings” to configure A/C ID, ICAO, wCube Preset AP channel A or B, Wi-Fi mode Gate2Gate, as shown in Figure 7-4. Figure 7-4 Initial Settings Page Note：For ground testing without ADS-B signal, 4G function can be kept as state ON while setting ICAO as 000000. Step 5 Select “SETTINGS” -> “Network” to configure network parameters, including SSID, @2020 Donica. All Rights Reserved.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX 4G Card APN, Captive Portal URL, 4G Passenger Access Control, WAN network configurations. Figure 7-5 Network Configuration Page @2020 Donica. All Rights Reserved.
Donica Aviation Engineering Co., Ltd. DT-XX-XXX FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
