User's Manual
Optional Specification Optional Specification
How To Add And Delete Channels By Manual
1. Select the channels as you want by pressing the 0~9 number buttons or
the ĴĶbuttons on the remote control.
2. Select add or delete the channels by pressing the MENU (ADD/DEL)
button on the remote control.
ADD : Add the channels those are not in the memorized channels.
DEL : Delete the channels those are not in the memorized channels.
Use to add or delete the channel according to preference.
Watching TV is an optional function which requires an additional part. If you want to
install this function, please contact the closest installation shop or regional dealer.
How To Select Channels Automatically
1. Press the SETUP (A.MEMO) button on the remote control to select all
available channels automatically.
2. After finishing the search channels select channel to be viewed.
ö If you want to skip the Auto channel select, press whichever button
on the remote control.
ö Channel may not be selected in a bad RF signal region.
ö Press the SETUP (A.MEMO) button on the remote control after switching
the Etc mode on the remote control.
TV Mode
1. Install the TV module on the product.
Please check the Connection Diagram
on the manual.
2. Select the TV mode by pressing
the MODE button on the unit or on the
remote control.
How To Select Channel
1. Channels select on the SKIP mode.
Display the TV channels only the memorized channels.
Select the desired channel by pressing the āăbuttons on the remote control.
2. Channels select on the SEARCH mode.
Select the channel and move one step manually.
Select the desired channel control the ĴĶbuttons on the remote control.
3. Press Number buttons
Select the desired channels by pressing the 0~9 number buttons on the
remote control.
Remote ControlUnit
.0%&
tvkl
ex : If you want to select 29 channel,
ྙ When press the number "2" on the remote control, display the "2-"
on the right edge of monitor screen.
ྚ Press number "9", and then switch the channel "29".