True Wireless Earphones & Charging Case NE-980 Instruction Manual Please read before operating product
Table of Contents Introduction..............................................3 Package Contents...................................3 Safety Instructions...................................4 Product Breakdown.................................6 How to Use..............................................7 LED Overview........................................12 Specifications.........................................13 Support..................................................
Introduction Congratulations, and thank you for choosing Naxa’s True Wireless Bluetooth® Earphones & Charging Case. This manual will help you operate your new device, but first you should familiarize yourself with the Bluetooth functionality of your mobile phone or other external devices before using the Naxa True Wireless Bluetooth® Earphones & Charging Case.
Safety Instructions Before using the device, read the operating instructions very carefully. Keep this operation manual for later reference. 1. Do not use an appliance for any purpose other than its intended use. 2. Warning: Do not expose the appliance to extreme temperatures, to strong temperature fluctuations, direct sunlight or humidity. 3. To prevent any potential auditory damage, do not listen to music at high volumes for long periods. 4.
9. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 10. The battery must be removed from the appliance before it being disposed of properly. 11. Only remove the rechargeable battery when you intend to dispose of the appliance. Have the rechargeable battery removed by trained professionals. 12. CAUTION! Risk of explosion if battery is replaced by an incorrect type of battery. 13.
Product Breakdown 1. Multi-Function Button 2. LED Indicator (Earphones) 3. Charging Case 4. LED Indicator 1 (Charging Status of Earphone) 5. LED Indicator 2 (Charging Status of Case) 6. Power Button 7.
How to Use Unpack all parts and check for damage that may have occurred during transportation. If any parts are damaged or missing, contact our after-sales service team. Clean the appliance and its components. • Fully charge the earphones and the case before first use. • Charge the case first, or insert the earphones into the case to charge both at the same time via the microUSB charging cable. •Disconnect the USB cable after charging.
Bluetooth® Operation 1. Remove the earphones from the charging case. 2. Press and hold the Multifunction button (1) on both earphones for 2 seconds until you hear the voice prompt “POWER ON” and the blue and red LEDs (2) start to blink alternately on both earphones (Pairing Mode). 3. Turn on Bluetooth on your connecting (mobile) device. Search for the earphones on your device and choose the name “NAXA NE-979” to connect. 4.
Playback 1. To play a song through your bluetooth earbuds from your mobile phone, press the multi-function button once. 2. To pause a song, press the multi-function button once again. Answering Calls 1. To answer incoming calls, briefly press the multi-function button once. 2. To end a call, briefly press the multi-function button again. 3. To reject an incoming call, press and hold the multi-function button for 2 seconds. 4. To redial a number, press the multi-function button twice.
.Charging Earbuds 1. Open the lid of the charging case. 2. Insert the earphones into the case. 3. Press the power button (6) on the bottom of the charging case. The earphones will start to charge. 4. The LEDs (2) will show the charging status of the earphones: Red – charging Off – fully charged Note: When the earphone batteries are low, an alert tone will indicate a low battery and the blue LED indicators (2) will blink slowly. Charging Case When fully charged, the case provides 2.
computer or a USB power adapter plugged into a wall socket. 3. The LED (4) on the charging case will show the charging status of the earphones when they are in the case: Blue – charging 4. The LED (5) on the charging case will show the charging status of the case: Red and blinking – charging Red – fully charged 5. Disconnect the USB cable when charging is complete.
LED Overview Charging Case Status LED Indicator (5) - ChargingB links red - Fully charged Red- Earphones Status Charging in charging case LED Indicator (L/R) (2) LED Indicator (4) RedB lue Power on Blinks red & blue alternately three times Blinks red & blue alternately three times Pairing mode Blinks red and blue alternately Blinks white and red alternately Paired Blinks blue slowly Blinks blue slowly Fully charged 12
Specifications Bluetooth® Version: 5.0 Charging Interface: Type-C Power Input: DC/5V, 0.5A Working Distance: Up to 33 Ft. Earbuds Battery Capacity: 45mAh/3.7V Support: A2DP/AVCTP/AVDTP/AVRCP/HFP Music Time: Up tp 3 Hours Charging Time: 1-2 Hours (Case), 1-1.5 Hours (Earphones) CAUTION ON MODIFICATIONS Any changes or modications not expressly approved by the grantee of this device may void the authority granted by the FCC to operate the equipment.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Support If you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at www.naxa.com to get up to the minute news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support. NAXA Technical Support 2320 East 49th St. Vernon, CA 90058 http://www.naxa.
