User's Manual

Wireless Earphone User Manual

Product Specifications

Bluetooth: V4.2

Driver Size: 9mm*2

Response Frequency: 20Hz-20KHz

Transmission: 360°, 10m

Impedance: 16ohm

Play Music time: 3-4 hour

Distortion: < 0.1%

Battery: 3.7V, 80mAh

Operating Instructions:

How to Power ON Your Earphones

Press & hold the button for 3 seconds to turn on the earphones.

How to Power OFF Your Earphones

Once the earphones are is on, press & hold the button for 3 seconds to turn off the earphones.

Initial Pairing

To use your Bluetooth earphones, you must first pair your earphones with a mobile phone. Once your Bluetooth

earphones are paired to a mobile phone, they will remain paired and automatically recognize each other

whenever they are within range.

1. Turn on your phone and ensure the Bluetooth function is activated.

2. Press & hold the POWER button for 3 seconds to turn ON until the red and blue lights flash (This means the

headset has entered pairing mode)

3. Search the Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user

manual for more information.

4. Click and pair.

5. The blue light flashes twice every five seconds means the pairing is successful

Please Note: If required, enter the password “0000”. Select OK or YES to pair your device.

Auto Re-Connect

1. Turn your device’s Bluetooth ON, before turning on the headset

2. The headset will connect automatically to the last paired device

Answer/End/Reject Call

Answering Call: During an incoming call, press the button to answer the call.

Ending Call: When on a call, click the button to end the call.

Redial: While on standby or playing music, double-click the MFB to dial the last call in your call log.

Play / Pause Music

Press the Multi-Function Button to play music and press it again to pause music.

PAGE 1
Wireless Earphone User Manual Product Specifications Bluetooth: V4.2 Driver Size: 9mm*2 Response Frequency: 20Hz-20KHz Transmission: 360°, 10m Impedance: 16ohm Play Music time: 3-4 hour Distortion: < 0.1% Battery: 3.7V, 80mAh Operating Instructions: How to Power ON Your Earphones Press & hold the button for 3 seconds to turn on the earphones. How to Power OFF Your Earphones Once the earphones are is on, press & hold the button for 3 seconds to turn off the earphones.
PAGE 2
Vol+/ Next Track - Press and hold the - Click the button to turn up the volume button to switch to the next song. Vol-/ Previous Track - Press and hold the - Click the button to turn down the volume button to switch to the Previous song. Charging Your Earphones Use the Micro USB cable provided with these earphones. Connect the Micro USB plug to the Micro USB charging port on the earphones. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.
PAGE 3
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.