User's Manual

Wireless Charger-W313
Please read the user manual
carefully before using the product.
USER MANUAL
18W
USB-A to USB-C
Charging Cable
18W Adapter
Charging Port
Cellphone Indicator
Watch Indicator
Earbuds Indicator
Compatible Sheet Folding Method
Product Specification
Package Contents
iPhone 14, iPhone 14 Plus,
iPhone 14 Pro, iPhone 14 Pro Max,
iPhone 13 mini, iPhone 13,
iPhone 13 Pro, iPhone 13 Pro Max,
iPhone 12 mini, iPhone 12,
iPhone 12 Pro, iPhone 12 Pro Max
(Compatible with official MagSafe cases)
For iPhone
For Earbuds
AirPods Pro (2nd generation)
AirPods Pro, AirPods Pro with MagSafe,
AirPods (3rd generation),
Airpods 2(Must place on the right place)
For Apple Watch
Apple Watch Ultra/8/7/6/5/4/3/2/SE
1
2
3
Model: W313
Input: 5V/3A 9V/2A
Output: Up to 2.5W For Watch
Up to 3W For Earbuds
Up to 10W For Cellphone
1 X Wireless Charger
1 X 18W Adapter
1 X User Manual
1 X USB-A to USB-C Charging Cable
Indicator Lights
1. When wireless charger is connected
to power source first time, all indicators
will light on for 3s. Then the indicator
will light off.
2. Blue lights on means the device is
charging normally.
3. When the wireless charger attach the
foreign objects, the indicators will flash
blue light. (Except for the watch indicator)
EX: When the cellphone indicator flashes
blue light, there are some foreign objects
on the surface of the cellphone
charging pad.
4. The blue light flashes, indicating
abnormal charging. (Except for the watch
indicator)
5. When the blue light flashes, the device
wasn’t placed on the right charging place.
Reminder
1. Make sure your devices support
wireless charging before using.
2. It is recommended to use the original
charging cable and adapter.
3. Please remove the cellphone/earbuds
case before charging.
4. Don’t use or place the product at high
temperature or expose direct to the sun.
5. Don’t immerse the product in water or
near ignition sources.
6. When the function temperature
exceeds 104 ℉, the charging will be
interrupted to avoid damage to
the cellphone/watch/earbuds battery.
7. AirPods 2nd has two different versions
of charging cases. A1938 supports wire-
less and wired charging. A1602 wired
charging only.
FAQ
Q1: How do wireless charging speeds
compare to a traditional wired charger?
A1: It depends on your device, adapter,
and wireless charger. It is recommended
to use the adapter for the product. Once
the wireless charger's input is lower than
5V/3A 9V/2A, the charging speed will be
lower.
Q2: Does the wireless charger hold a
charge when unplugged, like an AirPod
charger?
A2: NO! The wireless charger doesn't
contain an inside battery to store power.
Q3: How do I know whether my device
can use it?
A3: Please read the compatible sheet
before purchasing.
Q4: Can I use the wireless charger in
another country while traveling?
A4: The package contains an 18W
adapter that can be used on the
100-240V power source.
Troubleshoot
1. When the phone or watch cannot be
fully charged, try the following:
Open [Settings] - [Battery] - [BatteryHealth]
- [Turn off battery optimization].
2. When the blue light flashes, indicating
abnormal charging, please check whether
peripheral are around.
3. When the wireless charger stops
charging, please reassemble the product
and try it again.
Q5: Will the wireless charger still charge
with a protective case on the back?
A5: Please take off the cellphone or
earbuds cases before charging.
Q6: Why would the charging speed for
iphone get slower when it reaches 80%
of the power?
A6: Please check if the cellphone is in
trickle charge status. Then, try the
following to improve the charging speed:
Open [Settings] - [Battery] - [Battery Health]
- [Turn off battery optimization].
5
6 7 8
Product Support: 18 months
The product support team email:
ANY OTHER QUESTIONS?
Please contact the product support
team to get quick technical support.
Your satisfaction is always our top priority.
FCC warning:
Any Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
These limits are designed to provide
reasonable protection against harmful i
nterference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the
equipment and receiver.
-Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced
radio/TV technician for help.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum
distance 20cm between the radiator & your
body.
Please feel free to contact us through the
following steps:
1). Log in to your Amazon account.
2). Open your purchased orders
3). Click the store name next to "Sold by:"
4). Click "Ask a question."
[e-mail]
109 11
Designed in the U.S.
Made in China